Mesa Tactical SureShell Carrier For Urbino Riser 6-Shell, 12-GA Right Side Details

SureShell Carrier For Urbino Riser (6-Shell, 12-GA) (Right Side) Mesa Tactical Urbino pistol grip stocks fitted with a cheek riser can accept specialized four-shot or six-shot SureShell shotshell carriers. The two holes on each side of the cheek riser correspond with the holes in the mounting brackets of the SureShell carriers. Simply screw the flathead cap screws into the hex nuts retained in the inside pockets. Test the fit of the cheek riser to ensure the mounting screws do not interfere with the stock. If they do, remove them and grind them down a little until there is no interference. For easiest access with your support arm, the shells should be inserted in the carrier brass down. As with our other SureShell products, these shell carriers feature all aluminum construction. The field-adjustable cheek riser was developed to provide superior cheek weld when using optics. The cheekpiece snaps onto rails molded into the sides of specially equipped Urbino stock armatures. In the event of optics failure, the cheek riser can be quickly removed or readjusted to a lower level. SureShell carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard coat anodized for a rugged non-glare finish. SureShell yokes are secured to application-specific brackets, and some SureShell carriers include high temperature adhesive backed, die-cut rubber gaskets to protect the host shotgun’s finish. Item Nr.: 405-90150